View ZHX1820TV115THTR_7718143.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

an company product specification ps016007-0910 zhx1820 slim series sir top look transceiver copyright ?2010 by zilog ? , inc. all rights reserved. www.zilog.com
ps016007-0910 do not use in life support life support policy zilog's products are not authorized fo r use as critical components in life support devices or systems without th e express prior written approval of the president and general counsel of zilog corporation. as used herein life support devices or systems are devices which (a) ar e intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordan ce with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. a critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the fa ilure of the life support device or system or to affect its safety or effectiveness. document disclaimer ?2010 by zilog, inc. all rights reserved. information in this pu blication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. zilog, inc. does not assume liability for or provide a representation of accuracy of the information, devices, or technology described in this document. zilog also does not assume liability for intellectual property infringement related in any manner to use of information, devices, or technology described herein or otherwise. the information contained within this document has been verified according to the general pr inciples of electrical and mechanical engineering. z8, z8 encore!, and z8 encore! xp are registered tr ademarks of zilog, inc. all other product or service names are the property of their respective owners. warning:
zhx1820 slim sir top look transceiver ps016007-0910 table of contents iii table of contents description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 pin descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 leda led driver anode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 txd transmit data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 rxd/receive data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 sd shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 vcc positive supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 gnd ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 recommended application circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 electrical and timing specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mechanical drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 soldering and cleaning recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 reflow soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 manual soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 packing, storage, and baking recommendations . . . . . . . . . . . . . . . . . . . . . . . 11 storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 moisture-proof packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 taping specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 customer support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
zhx1820 slim sir top look transceiver ps016007-0910 1 description the zilog zhx1820 is a low-profile version of zilog?s popular zhx1010 1-meter transceiver. packaged in the ?top-look ? configuration (that is, the lens axis is perpendicular to the mounting surface), the transceiver is mechanically enhanced for ultra compact, power-conscious po rtable products, such as portable printers, handheld computers, and personal data assistants (pdas). designed to operate using the irda-data mode, the transceiver combines an infrared emitting diode (ired) emitter, a pin photodiode detector, a digital ac coupled led driver, and a receiver/decoder in a single package. the zilog zhx1820 provides an efficient implementation of the sir standard in a small-outline footprint format. application circuit space is also minimized, as only three components are required. zhx1820 also features an independently controlled shutdown that minimizes current draw to a maximum of 1 ? a. features ? compliant to irda data specification sir ? wide power supply voltage range, 2.4 to 5.5 v ? low-power, listening current, 90 ? a (typical) at 3.0 v ? slim form factor (9.0 mm long x 3.65 mm wide x 2.75 mm high) ? only two external components required ? telecom operating temperature range (?30 c to +85 c) with the ZHX1820TV115THTR ? extended operating temperature range (?40 c to +85 c) with the zhx1820tv115xhtr ? 0 to 1 meter minimum link distance; 0 to 1.5 meters typical (?30 c to +85 c) ? 0 to 80 cm minimum link distance; 0 to 1.2 meters typical (below 30 c) ? meets iec 825-1 class 1 eye safety specifications
zhx1820 slim sir top look transceiver ps016007-0910 2 block diagram figure 1 is the block diagram for the slim sir transceiver. figure 1. slim sir tran sceiver block diagram pin descriptions the zhx1820 transceiver uses the pins li sted in table 1. the pins are described in this section. table 1. pin out for the zhx1820 transceiver pin name function i/o 1 leda ired anode ? 2 txd transmitter input i 3 rxd receiver output o 4 sd enables shutdown mode i 5v cc supply voltage ? 6 gnd ground ?
zhx1820 slim sir top look transceiver ps016007-0910 3 leda led driver anode (power) this output is connected to the led anode. current to the led is sourced through an external resistor. txd transmit data (input, active high) this cmos input is used to transmit seri al data. this input has an internal pull- down resistor that is disabled (open-circuited) during shutdown. rxd/receive data (output, active low) this output indicates received serial data. it is a tri-state, slew rate controlled cmos output (tri-stated during shutdown) driver capable of driving a standard cmos load. no external resistor is required. sd shutdown (input, active high) this input is used to place the integrated circuit into shutdown mode. module shut- down current is influenced by the c hoice of capacitor used from v cc to ground. v cc positive supply (power) connect to positive power supply (2.4?5.5 v). filter with a 0.33- ? f ceramic bypass capacitor and terminating resi stor as close as possible to the v cc pin. gnd ground (power) connect to ground of the power supply. a solid ground plane is recommended for proper operation.
zhx1820 slim sir top look transceiver ps016007-0910 4 recommended application circuits figure 2 shows application block diagr ams for the zhx1820 transceiver. figure 2. application block diagrams
zhx1820 slim sir top look transceiver ps016007-0910 5 electrical and timing specifications table 2 through table 4 present the electr ical and timing specifications for the zhx1820 transceiver. table 2. absolute maximum ratings parameter symbol minim um maximum unit comment supply voltage v cc ?0.3 6.0 v v cc , gnd input voltage v in gnd?0.3 v cc +0.3 v txd, sd output (external) voltage v out gnd?0.3 v cc +0.3 v rxd led current i led 700 ma 20% duty cycle, ta = 2 5 c , t on < 90 ? s storage temperature t st ?40 100 c solder temperature t sol 240 c table 3. recommended operating conditions parameter symbol minimum maximum unit supply voltage v cc 2.4 5.5 v led voltage v led 2.4 6.0 v ambient operating temperature t op ?30 85 c ambient operating temperature * t op ?40 85 c note: * zhx1820tv115xhtr only table 4. electrical characteristics parameter symbol condition min typical max unit remarks high-level input voltage v ih 0.6 v cc v cc +0.5 v txd, sd low-level input voltage v il ?0.5 0.2 v cc v txd, sd high-level output voltage v oh 2.2 v rxd low-level output voltage v ol 0.4 v rxd transmitter current i led 300 ma listening current i cc 90 150 ? a receive current i cc 90 150 ? a
zhx1820 slim sir top look transceiver ps016007-0910 6 figure 3 through figure 6 show various electrical characteristics. figure 3. i f -ie characteristics (0 ) standby current i stb 1 ? asd=v cc , txd=0 v optical rise/fall time t rr , t rf 100 ns rxd pulse width t pwa sir=115.2 kbps 1.1 1.6 3.9 ? s power shutdown time t sd 1 ? s startup time t stu 200 ? s receiver latency t l 100 ? s trans. radiant intensity i e i led =260 ma 40 100 mw/sr ? h, ? v< (+ 15 ? ) min. threshold irradiance e emin v cc =3.3 v 2 3 ? w/cm 2 ? h, ? v< (+ 15 ? ) angle of half intensity ? 20 hor. and vert. light pulse rise, fall time t or , t of 40 ns optical pulse width t opw 20 ? stxd=?h? optical overshoot t opo 3% peak wavelength ? p 870 nm unless otherwise noted: v cc =3.3 v, gnd= 0 v, t a = 25 c table 4. electrical characteristics (continued) parameter symbol condition min typical max unit remarks
zhx1820 slim sir top look transceiver ps016007-0910 7 figure 4. i f -leda characteristics (0 ) figure 5. directive characteristics (emitting) figure 6. directive characteristics (receiving)
zhx1820 slim sir top look transceiver ps016007-0910 8 mechanical drawings the mechanical drawings for these transceivers are shown in figure 7. figure 7. zhx1820 mechanical drawing 1 . 3 5 1 . 4 7 5 33.1 1.8 2 . 7 5 3 . 3 3 . 65 units: mm tolerance: +/- 0.2 pin function pin function 1 gnd 2 rxd 3 vcc 4sd 5 6 leda txd p1.550.15=7.750.1 0.7 3.875 (3.875) 0 . 4 7 5 (6) (5) (4) (3) (2) (1) 0 . 8 note that this style has a larger emitter lens than receive lens rx tx receiving center lens view contacts view top look solder pad layout 9.0 (ref.) emitting center this style does not have side solder vias side view 0.70 0.80 1.55 mounting center 4.325 0.45 0.45 0.75
zhx1820 slim sir top look transceiver ps016007-0910 9 soldering and cleaning recommendations follow these recommendations to maintain the performance of the zhx1820 transceiver. reflow soldering ? reflow soldering paste is recommended: melting temperature: 178 c ~ 192 c composition: sn 63%, pb 37% ? the recommended thickness of the metal mask is between 0.2 mm and 0.25 mm for screen printing. ? number of soldering times: 2 times maximum ? the temperature profile at the top surface of zhx1820, shown in figure 8, is recommended. figure 8. temperature profile at the top surface of zhx1820 manual soldering ? use 63/37 or silver solder. ? use a soldering iron of 25 w or smaller. adjust the temperature of the soldering iron below 300 c. ? finish soldering within 3 seconds. ? handle only after zhx1820 has cooled off.
zhx1820 slim sir top look transceiver ps016007-0910 10 cleaning perform cleaning after soldering under the following conditions: ? cleaning agent: alcohol ? temperature and time: 30 seconds below 50 c or 3 minutes below 30 c ? ultrasonic cleaning: below 20 w
zhx1820 slim sir top look transceiver ps016007-0910 11 packing, storage, and baking recommendations follow these recommendations to maintain the performance of the zhx1820 transceiver. storage to avoid moisture absorption, zhx1820 reels must remain in the original, unopened moisture-proof packing. parts must be soldered within 72 hours after unpacking. reels that have been unpacked, but will not be soldered within 72 hours, must be stored in a desiccator. baking parts that have been stored over 12 months or unpacked over 72 hours must be baked under the following guidelines. reels 60 c for 48 hours or more loose parts ? 100 c for 4 hours or more or ? 125 c for 2 hours or more or ? 150 c for 1 hour or more
zhx1820 slim sir top look transceiver ps016007-0910 12 moisture-proof packing in order to avoid moisture absorption du ring transportation and storage, zhx1820 reels are packed in aluminum envelopes (see figure 9) that contain a desiccant with a humidity indicator. while this pa ckaging is an impediment to moisture absorption, it is by no means absolute, and no warranty is implied. the user should store these parts in a contro lled environment to prevent moisture entry. please read the label on the aluminum bag for indicator instructions. figure 9. zhx1820 packaging
zhx1820 slim sir top look transceiver ps016007-0910 13 taping specifications figure 10 shows the reel dimensions for the zhx1820, and figure 11 shows the tape dimensions and configuration for the zhx1820. figure 10. zhx1820 reel dimensions (unit: mm) " #$ $"%$&' ( ) *$&+'"#,
-#,
#,./0 1 2&*34"5,# device carrier tape a w1 w2 (max) n (hub dia.) reel qty size 0.25 +2/-0 6 7#-(, 16 mm 330 16.4 21.6 80 mm 2,000 13.0+0.50/-0.20 label a pasted here a 21.00.8 w2 n w1 detail a detail a 2.00.50 (3plcs)
zhx1820 slim sir top look transceiver ps016007-0910 14 figure 11. zhx1820 tape dimensions and configuration (unit: mm) user direction feeds trailer (40 mm min.) leader (400 mm min) parts mounted qty (see table) user direction of feeds
zhx1820 slim sir top look transceiver ps016007-0910 15 ordering information to order top look zhx1820, use zi log part number ZHX1820TV115THTR (?30 c to +85 c) or zhx1820tv115xhtr (?40 c to +85 c).
zhx1820 slim sir top look transceiver ps016007-0910 16 customer support for answers to technical questions about the product, documentation, or any other issues with zilog?s offerings, please visit zilog?s knowledge base at http:// www.zilog.com/kb . for any comments, detail technical questions, or reporting problems, please visit zilog?s technical support at http://support.zilog.com .

▲Up To Search▲

Price & Availability of ZHX1820TV115THTR

	To Download ZHX1820TV115THTR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .